Ford Mondeo ST Forum banner
st200
1-20 of 20 Results
  1. Engine, Exhaust and Induction
    Hi, i have searched internet, ebay, etc. I need an exhaust, cat back, but i cannot find it anywhere. I need it fast. Anyone got any tips?
  2. Was It You... Mondeo ST Spotters
    Hello All, Just seen a pristine ST200 LE on ebay, looks absolutely fantastic. He has done loads of work underneath replacing tons of parts by the looks, he has also done lots of small touches to subtly make it look concourse. Hopefully someone can invest, looks expensive but for its condition...
  3. Lighting & Electrical
    and when it jumps i see the small distance meter that you can reset (don't know what it's called in english) move as well. What do i replace to fix this and where can i find it?
  4. Engine, Exhaust and Induction
    Hi all, the IMRC system is causing me a headache. Since i got this car 2 years ago it has never worked optimally. First it stuttered a little bit. It was always a :censored: shoot whether it would work or not when driving. So, i got another IMRC box from ebay, 2nd hand. I relocated it under...
  5. Clutch, Gearbox & Running Gear
    Hey everyone. I've just joined the club this week and I'm on a mission. I'm working on the topic of many inches of forum space around the world - an RX-8 engine conversion. I have a 3.0 Jaguar V-6 on my garage floor next to the RX-8 engine and box. The Mazda pressure plate seems to have the...
  6. East of England
    Hey everyone. This is my 1st post here and I'm on a mission. I'm working on the topic of many inches of forum space around the world - an RX-8 engine conversion. I have a 3.0 Jaguar V-6 on my garage floor next to the RX-8 engine and box. The Mazda pressure plate seems to have the same bolt...
  7. Faults, Problems and Solutions
    Hi, have just purchased a 99 st200. Car bogs down and won't rev over 3500 - 4000. Have checked the IMRC it is working, I can see the arm rotating and opening at around 4000 and all cogs trying fine inside. Another strange occurrence is the when driving car won't rev over 4000 (tried with...
  8. Brakes, Wheels, Tyres | Steering and Suspension
    Old thread http://www.mondeostoc.com/forums/topic/62257-looking-for-mondeo-st200-estate-rear-self-levelling-shock-absorbers-anyone/?hl=%2Bself+%2Blevelling from a time long ago (maybe a week?) when I had hope not despair. So here I am again looking for rocking horse manure. Mondeo ST200...
  9. Brakes, Wheels, Tyres | Steering and Suspension
    Just failed the (Swiss) MOT. A bit gutted. Looking for Mondeo ST200 Estate Rear Self Levelling shock absorbers, anyone? Apparently the left damper is 50% strength of the right. Garage then reduced right damper tyre pressure (by 1 bar), retested it and it was perfect, seemed like black magic...
  10. New User Introductions and Greetings
    St200
  11. Engine, Exhaust and Induction
    found these on ebay....... wonder if anyone actually falls for it? http://www.ebay.co.uk/itm/FORD-MONDEO-MK1-MK2-2-5-V6-EXHAUST-DE-CAT-PIPE-/310381315668?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item48442b0654...
  12. General Chat
    The Pivot Mega Raizin... http://www.ebay.co.uk/itm/Universal-Fuel-Saver-Voltage-Stabilizer-Regulator-Grounding-Pivot-Mega-Raizin-/271206811891?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f252f88f3 http://www.pivotracing.com/product/VS-M A friend of mine had one of these on his R32 and said...
  13. Mondeo ST Related Discussion
    So my beloved ST24 blew a spark plug out, and took the thread with it. Received quote of £700 to fix which is too much so its going spares/scrap eventually.. Im about to pickup a V reg ST200 and am wondering; Do i need to look out for same things as the 24 (IE, water pump, moosing etc) Is there...
  14. Suspension, Struts and Bushes
    Due to the beaST failing the MOT, one of the jobs was the offside track rod end needed replacing, so I thought why spend £25 letting someone else do it, it can't be that hard. So firstly put the handbrake on, loosen the wheel nuts and jack up the appropriate wheel, secure on an axle stand and...
  15. Engine, Exhaust and Induction
    Today i spoke to Mike at torque technique, he/they have nearly 30 years experience and have made systems for all types of vehicle,(www.torquetechnique.co.uk) and he said they are willing to do a group buy, with possible 20% discount for 10 or more systems. I need too finalise figures etc...
  16. General Chat
    There's a little Japanese Modifyer in Fareham Hampshire called Mission Motorsport, it's run by a, as it turns out, very knowledgeable Chinese Women and some of her family. They appear to be shut half the time and when you look through the window it's full of parts lying around. Today I could...
  17. Engine
    How to fit water pump belt (also first part of replacing water pump) and relocating IMRC. First remove Engine/IMRC cover in front of UIM. At this point I relocated my IMRC, so will describe this. Undo the three bolts arrowed. Remove the battery. Then feed the IMRC around the pipework to...
  18. New User Introductions and Greetings
    hi there, my real names Martyn & i live in Wells, somerset & have just {yesteday} taken ownership of a 2001 st200 from mike jones in south wales. ive had 2 st24s before & after looking at a few write ups, decided to get a st200,love the car, taking a bit of getting used to after a subaru, but am...
  19. Faults, Problems and Solutions
    not quiet sure what the issue is, everything seemed fine, had the original clock in my 24 then i swapped it for an st200 trip i had, worked fine for 2-3days then just stopped working. powers up with ignition off, alarm LED flashes. Radio works fine as before so do all other electrics. When i...
  20. Service and Maintenance
    I used the guide in Ford Wiki (http://fordwiki.co.u...al_And_Cleaning). All I'm doing here is adding Phots and a few tips picked up in the way. A. The biggest tip is to change your spark plugs at the same time. B. Next allow 2 days. take it apart on day 1 and soak everything overnight if you...
1-20 of 20 Results
Top