Ford Mondeo ST Forum banner
1 - 20 of 28 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi,
I'm new here and need some help with my Sat Nav. I have a 2005 55 plate Mondy ST TDCi with the 2004/5 maps installed. I want to upgrade to the new maps but think the £240+ price tag that Ford want to charge me is way too steep.
Doing some research it looks like I need to upgrade the firmware first but can't find the disc anywhere.

Does anyone on this forum have a copy that they've used already and would be willing to pass it on to me??

Thanks for your help

Will.
 

· Registered
Joined
·
41 Posts
Just tried to buy a disk from the mynavishop site but its no longer available. Does anyone know where I can get the 2010/11 data dvd and firmware cd as mine is 2006/07. Also has anyone bought an upgrade disk from somewhere other than Ford and does the disks work ok.

Thanks in advance

Dave M.
 

· Registered
Joined
·
103 Posts
Just tried to buy a disk from the mynavishop site but its no longer available. Does anyone know where I can get the 2010/11 data dvd and firmware cd as mine is 2006/07. Also has anyone bought an upgrade disk from somewhere other than Ford and does the disks work ok.

Thanks in advance

Dave M.
The 2008 / 2009 / 2010 DVD is easily downloaded and burnt onto a DL DVD, the update CD is normally included. Pity you arent closer - help you with both, if you are in the WA87EJ area I could help you with both.
 

· Registered
Joined
·
538 Posts
Just tried to buy a disk from the mynavishop site but its no longer available. Does anyone know where I can get the 2010/11 data dvd and firmware cd as mine is 2006/07. Also has anyone bought an upgrade disk from somewhere other than Ford and does the disks work ok.

Thanks in advance

Dave M.
i may try here http://www.sat-navi.com/ford.html just hope it brings mine back from the dead
 

· Registered
Joined
·
538 Posts
this is the screen i now have first 1 is the system trying to read the disc second screen is the message i get seconds later
is it possible to reload the old software if you still have the original disks, anyone done this as I need to be sure that i can roll back the install if it goes wrong.
[/quote]

no mate you cant roll back i need to find a working firmware disc just to get it running again well thats wot i am hoping anyway
 

· Registered
Joined
·
538 Posts
as many of you may have read i had problems with my denso unit and a trip down to see L11XXY today was well worth it he looked at it a new wot the problem was right away and got it up and running for me again i just cant recomend him enough to anyone who has any problems with there denso and doesnt wana get ripped off by fraud
 
1 - 20 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top